January 17, 2023
Traffic load test for more than 10 years,Cracks have appeared in the road、Rutting and other diseases。
For this reason, Tianjin Avenue Maintenance and Management Center adopted the green and low-carbon foam asphalt cold in-place recycling process for 14. cm (Raw asphalt concrete 12 cm +Raw water stabilization2 cm)The old pavement is regenerated.,Lay 10 more on top of it cm Asphalt concrete surface course,Finally, the maintenance and renovation of the road was completed.。
Wittgen was used in the construction of cold in-place recycling of foamed asphalt W 380 CR Implementation of cold in-place recycling technology of foamed asphalt based on synchronous paving。Compared with the traditional construction scheme,Wittgen W 380 CR An entire lane can be regenerated at one time.,Very efficient construction,You can save 30%Duration,Reduced traffic impact during construction。
In addition,Because W 380 CR An undercutting process is adopted,Uarantee the uniformity of the recycled material,The composition of the recycled mixture can be accurately controlled according to the preset mixing ratio,Can effectively eliminate reflection crack,And greatly improve that quality and the service life of the pavement.。
While reducing the use of new materials and the removal of road waste,It can also reduce emissions by about 70 percent%,Realizing green environmental protection、Energy saving and high efficiency,It has brought remarkable social and economic benefits.。
China Forestry Machinery Pioneer It has 17 years of research and development of forestry machinery、Manufacturing experience Guangxi Xuwo Engineering Machinery Co., Ltd. Will be on November 26.-29 Shanghai BMW showE4-579 Wonderful appear
November thirteenth,Accompanied by Vice General Manager Li Yongjie, the delegation of Zhongke Xinji Engineering Technology Co., Ltd. visited Fangyuan Group.。 Guests go deep into the production line of Fangyuan Group,Observe the production
Danasen is the world leader in hydraulic power conversion equipment,You are invited to attend from November 26 to 29, 2024,Held at Shanghai New International Expo Center BAUMA CHINA (Shanghai BMW Construction Machinery Exhibition)。 This exhibi
November thirteenth,Chairman-in-Office of Sany Group、President Tang Xiuguo led the team to Kunming, Yunnan,Visit to Yunnan Jiantou Group,Secretary of the Party Committee of the Group、Chairman Chen Zujun and his delegation held a discussion.。The two sid
Copyright Notice 2002-2024 global-ce.com Construction Machinery Online. All rights reserved.
Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China