Products Center
More Products

Lingyu Auto: To Maximize the Profit of "Making Money", We Must Do This First!

November 07, 2022

Mixer Truck as“A sharp weapon for making money”,Bring a steady stream of benefits to the card friends,In order to be able to operate stably for a long time,Maintenance and protection in daily operation is particularly critical.。

Routine inspection

The mixer Truck is most afraid that the pot will not turn on the road.,Generally, the concrete tank shall not be stopped for more than 2 hours.,CConcrete above grade 40 can't stop on the road.。When the car starts,Let the jar rotate at a low speed first.,Check the tire tread around the car、Tire pressure, etc,Check for stones、An iron nail or something stuck in the womb.,Clean it up in time。

Inspection of special precautions

Bolt routing inspection

Comprises a speed reducer and a tank body connecting bolt.、Retaining bolt of reducer base、Connection bolts andUType bolts, etc,Regular maintenance must be carried out in daily operation.,Check whether the new Vehicle is loose before delivery.,The first re-tightening cycle is the first week of use.,Check and tighten once a month afterwards,Prevent trouble before it happens。

Lubricating oil replacement

Including reducer gear oil、Hydraulic oil in the hydraulic system、Engine oil, etc,Once missing, it will cause wear and tear to the relevant components.,Affect the overall performance of the car。Recommended replacement at first 100 hours of operation,Replace every 1000 hours thereafter(Replace at least once a year )。

 

Radiator filter element replacement

The radiator is the equivalent of the car's breathing system.,Once“Breathing”Not clear,It will cause the engine to overheat and cause problems such as cylinder explosion.,Therefore, we must check regularly in our daily work.,Replace the filter element,Can be replaced at the same time as hydraulic system maintenance,Replace the filter element when the vacuum gauge pointer is in the red zone,Be replaced at least once a year。

Add butter

Drive shaft、Raceway、Tug、Main slot shaft、Parts such as the control lever shall be filled with grease once a month.,Reduce wear on critical components,Thereby prolonging the service life.。

Card friends,Have you learned??

GetThis knowledge,Further from the earnings.!

Featured

more

Construction Machinery Online

Language Options

E-Mail: alina@global-ce.com TEL: 0086-10-84673349 FAX: 0086-10-84673349
Site: International - China - U.S.A - Russia - France - Spain - Portugal - India - Germany - Saudi Arabia - Indonesia

Copyright Notice 2002-2024 global-ce.com Construction Machinery Online. All rights reserved.

Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China