Family outing: Four Liebherr K series cranes support bridge construction project

To facilitate management of a floodplain in the Emsland region for the next 100 years, a replacement of the Versen floodplain bridge is under way in Meppen. The 85 bored piles, which are more than 20 metres in length, are already in place. The bridge requires a total of 5,000 cubic metres of concrete and more than 700 tonnes of steel – all will be lifted by the four Liebherr Tower Cranes. The heaviest parts, formwork tables with infill zones, weigh between 2.2 and 3.1 tonnes. Overlapping operating areas have been created through the insertion of tower sections to ensure that all loads can be handled without the help of mobile cranes.

The Versen floodplain bridge is 211 metres in length and is therefore the second longest in the Emsland region, only beaten by a bridge in Rhede (Ems). As the entire length of the bridge requires optimal coverage, the crane company Maschinen- & Anlagen– Reparatur- & Montage GmbH, MARM for short, selected four Liebherr Tower Cranes: the two 81 K.1 are operating with a 48-metre radius and a hook height of 29 metres, the two 53 K with a 40-metre radius and a hook height of 23.8 metres. Alongside their reach, it was the high handling capacity of the cranes, a result of Liebherr’s in-house produced drives, that proved to be a decisive factor for this choice.

Previous: EXTRA DAY’S HOLIDAY FOR EMPLOYEES AS JCB MARKS 75TH BIRTHDAY

Next: Closing the gap – Schlamann takes delivery of Liebherr LTM 1060-3.1 mobile crane