May 15, 2020
Many customers often ask us what the function of a row of holes in the fork is. Is it intended to be the special mark of the fork? Actually, this is the electrophoretic hole we cut on the fork to facilitate the flow of the electrophoretic fluid inside the fork.
Electrophoresis is one of the most effective methods for coating metal workpieces. Electrophoretic painting is to have been painted on the conductivity of the material in the full of water to dilute the concentration of low electrophoretic coating as anode or cathode in the tank, the other set in the tank and its corresponding cathode (or anode), in the indirect communication between dc after a period of time, in the coated surface sedimentary out even close, not dissolved by water coating method of a kind of special coating.
Electrophoretic hole is marked
Electrophoresis primer for cutting fork platform and guardrail
Main advantages of electrophoretic primers over other primers:
The electrophoretic coating has high permeability and can permeate into the interior and gap of the coating.
The paint film is uniform, fine and tight.
Strong corrosion resistance;
High hardness, impact and wear resistance;
Corrosion and color resistance, aging resistance;
The low solvent content of electrophoretic coatings is beneficial to environmental protection and production safety.
Above is a rusting fork (regular paint) made by a manufacturer in March 2019.
Above is a cutting fork made by sinobang in 2012
Most of the structural parts of the cutting fork, small parts of the arm car and thin plate parts are made of electrophoretic primer, which greatly improves the corrosion resistance and rust resistance of the structural parts and maximizes the safety and service life of your equipment.
On December 12th, Asian Construction Equipment Group Co., Ltd. (abbreviated as ACE Group) Xuchang Production Base hosted a delegation of senior clients from The Republic of Tajikistan for an in-depth facility inspection. Guided by the warm winter sun, th
Despite the biting cold of early January, the spirit of international cooperation remained warm and vibrant. On January 5, 2026, three clients from Cameroon traveled thousands of miles to Henan, China, arriving with high expectations for a visit to Asian
Copyright Notice 2002-2026 global-ce.com Construction Machinery Online. All rights reserved.
Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China