Products Center
More Products

"Winter" Maintenance Guide for Mountaineering Machinery Loaders

November 13, 2024

The temperature plummeted,Winter condition mode on

Whether the loader can be started smoothly

Become the top priority in the hearts of many machine friends

Mountain Mechanical Loader“For the winter”Maintenance Guide

Warm online,Start by servicing the engine

Help the machine to start smoothly,Start work efficiently

Loader Winter curing

SEM

MACHINERY

The starting is exquisite,Don't worry about starting work

The loader engine starts,Attention first“Cold”After“Hot”

Make full preparations according to the time.,Winter construction is more in place

The single starting time shall be less than 10s

At least 60 minutes between two startss

Stop starting when it cannot be started for three consecutive times

Restart after finding out the cause and eliminating the fault

 

After starting,3 minutes of idle warm-up is required.

The idling time in winter should be extended appropriately.

Do not immediately run the engine at high speed

 

 

 

Loader Winter curing

 

SEM

MACHINERY

There are considerations for downtime,The state does not drop the line

 

End the day's work,Before entering a full shutdown

Give the engine a little time to slow down.,Smooth start the next day

 

After turning off the key switch

The urea pump depressurizes、Suck back

Therefore, it is necessary to wait for 3 minutes.

The main power supply can be turned off

Prevent the urea solution in the pipeline from crystallizing at low temperatures

Avoid frost cracking of the pipeline

 

 

In case of long-term shutdown and storage,It needs to be started once a month

Idle for 5 minutes,Carry out relevant operation and inspection

Periodically activate the complete machine status,Sustained good performance

 

 

 

Loader Winter curing

 

SEM

MACHINERY

Drain well,Performance is under control

 

After daily completion,It needs to be drained in time

Engine Shuihanbao drain valve、Brake the drain valve of air reservoir

Fuel tank bottom drain valve

Lock the three water drain valves.,Reduce“Frozen oil” Probably

Power output is in good condition,More efficient operation

 

Smooth start,I'm not afraid to work in winter.

Reliable hard power

More“For the winter”Maintenance secret book on the way

Stay tuned,Be there or be square

Construction Machinery Online

Language Options

E-Mail: alina@global-ce.com TEL: 0086-10-84673349 FAX: 0086-10-84673349
Site: International - China - U.S.A - Russia - France - Spain - Portugal - India - Germany - Saudi Arabia - Indonesia

Copyright Notice 2002-2024 global-ce.com Construction Machinery Online. All rights reserved.

Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China