Products Center
More Products

Lingyu Auto: In the Face of "Cold BUFF", How can "Pot New" Always Be There?

January 15, 2024

WinterSeasonBaoRaiseAttackSlightly

It is very cold in winter

In low temperature environment

Want the new energy mixer to have a longer life?

Ensure normal daily use

It is also inseparable from careful care and maintenance.

Current period,Xiaobian will bring you card friends.

Winter Maintenance Strategy of New Energy Mixer

Take you to understand in detail

How to take care of your car“A new can”As before

01

Power Battery:Scientific charging,Pay attention to keeping warm

Power system of new energy mixer Truck at presentPrimarily lithium-ion batteries,Due to its chemical properties,Low temperature performance will be weaker than normal temperature.,Specifically, it is not suitable for large current charging.、Discharge,So,Low temperature Vehicles will cause some changes.:

First,Power Battery(Big battery)The discharge capacity is reduced,The power performance of the whole Vehicle is weakened,If the ambient temperature exceeds the storage range,Vehicles  (Equipment)  Appropriate measures must be taken for storage,Otherwise, the battery will be irreversibly damaged or destroyed.,There are even security risks。If the vehicle is not operated in a continuous low temperature environment,It is recommended to park the vehicle in an insulated environment when not in use.,It's better to put it into storage in time。

The second is low temperature environment.,It is recommended to charge the gun before driving or wait for heating in situ.,Lowest temperature of power batteryUp to 5℃,Improve energy recovery efficiency,AtElectric quantity of complete vehicleSOCBelow 30%Time,Please charge it in time

In addition,Low temperature environment,Large current charging will affect the power battery.(Big battery)Damage to the system,The service life of the power battery will be reduced.,To protect the power battery system,The charging power will be adjusted according to the temperature of the power battery,Charging duration will be increased by 0.5-1h。

02

Upper loading tank body:Timely maintenance,Intimate care

 1. The tank shall not be stopped for a long time.

While waiting for unloading,It is strictly prohibited to stop the transfer for a long time when loading.。It is easy to cause the concrete material to deposit and bond if the transfer tank is stopped for a long time.,Especially in winter.,Cold weather can accelerate concrete bonding,More likely to cause loss of solid tank。

2. Keep the tank clean

Keep the car body clean and tidy in winter.,Due to the thermal insulation of canned clothes,Timely check whether there is any foreign matter at the gap between the reducer and the tank.,If there is one,It needs to be cleaned up in time,Avoid oil leakage caused by damage to the oil seal。

3. Regular overall maintenance

If the vehicle is not used for a long time,A systematic vehicle maintenance is also required.。Due to the mixing drum、Feed hopper、Parts such as discharge chute are in contact with sand for a long time.,All belong to wear parts.,Steel plate surface will be rusted after shutdown,Paint is required for surface application。After being parked for too long,Lubricating oil for components、Fat will dry up or deteriorate.,Poor lubrication of all parts during operation。Therefore, before restarting the mixer Truck after shutdown,The entire lubrication system must be checked one by one,Add or change oil if necessary。

03

Develop good habits,Avoid unnecessary damage

CardFriends, remember!Be sure to start very gently and slowly in winter,Don't rush forward directly with one foot on the accelerator.。On the one hand, this is to make the load of the mixer Truck engine as small as possible when it does not reach the normal operating temperature.,On the other hand, it is also to keep the tires warm.,While still in a relatively hard state,There is a gradual heating process.。Soft starting mode on mixer truck engine、Tyres and safety are good.。Finally,It is also necessary to ensure that the control handle is in the stop position before starting,Avoid the impact damage to the hydraulic system caused by starting with load。

 

After startup,The mixer truck engine shall be maintained at 1100 rpm/Minutes or so,Allow the mixer truck to warm up before starting,During this period, do not step on the accelerator and do not let the engine speed too high.。When preheating, it is not necessary to wait for the engine temperature of the mixer truck to rise to the best temperature before starting.,As long as the needle of the thermometer starts to rise.。

As the weather gets colder and colder,Rain and snow will also occur more frequently in winter.,Everyone is driving.,Be sure to be safe.,Keep the distance between cars。Observe the icing on the road at any time,Slow down ahead of time,Slow through。When driving in rainy and snowy weather,More importantly, keep a good distance between cars.,Do not coast in neutral、Hit the direction urgently、Slamming on the brakes,Speed control at 40km/hFollowing。

Above dry goods

Do you remember the card friends??

It's getting cold,Card friends go out to work

Remember that safety is the first.

Secondly,As a good partner on the way to make money.

Only take good care of your car.

To maketaBetter service for card friends,

Become our real money-making weapon.!

What else do you want to know about maintenance?

You can leave a message in the comment area to tell Xiaobian.~