Sany Heavy Industry Co., Ltd.: This STC1000C7-8 must be seen if you want to upgrade from medium tonnage to 100 tons!

If we say that the medium-tonnage crane is a necessary tool for lifting people to become rich.，The 100-ton crane is used for combustion-supporting hoisting.“The strongest springboard”。So，Those who want to March into the 100-ton class will think more.：How is the performance?？Is the configuration good?？Is there any operational value?？These seemingly fastidious demands，In fact, the test is the foundation of Sany.。

Today，Heavy elder brother is taking the choice of 100 tons of class sincerity.——STC1000C7-Here comes 8！

01
Performance first

STC1000C7-8 Main arm 75.5m，With fly jib 102.5m，Maximum working radius 64m，Maximum lifting height 76m，Give consideration to both lifting height and lifting distance。

Upgrade 2.Oval section, version 0，Slider clearance decrease，Optimize to 18mm。2-Section of 7-section boom is averagely increased by 2.3%，End Arm Perimeter Lift 5.7%。The manufacturing process of oval cross section is very complicated.，The cost is also high，STC1000C7-8 Willing to stick with，Because it has a thicker section.，Stiffness increased by 20%，Better bending and torsion resistance。When carrying out the high-frequency working condition of the fully extended boom，Performance improvement 9.8%。

02
Based on efficiency

STC1000C7-The transition efficiency of 8 is very high.。Can carry 27 tons of counterweight（Front 12t，Rear 15t）+Transfer of base plate with Vehicle，Easily cover 100-ton working condition。If there is a higher level of work, we need to use the full 46 tons.，That trailer can be easily handled.，And that transfer cost is low。Get on the highway，It only needs to be disassembled and hooked to go into battle lightly.。

In addition，Its single aircraft combat capability is very strong.。Counterweight can be moved backward 550mm，Performance straight up 20%Above。Anterior position for narrow spaces，Rear position for conventional lifting，The site has strong adaptability。If full counterweight is used+Backward function，Its performance is even comparable to the previous 200 tons.。

03
Focus on experience

It is worth mentioning that，STC1000C7-8 also carries many innovative technologies.。Standard winch servo，The operator does not need to watch the position of the hook at any time.，There is also no need for a manual retractable hook.，Significantly reduce operational fatigue。Standard intelligent one-button arm extension，Continuous operation of the handle is not required，Free your hands completely。These two functions are used in combination.，Telescopic arm capable of realize unmanned。

In addition，Jib recovery、Counterweight lifting and placing、Slewing and other actions support wireless remote control.，There is no pressure to operate by one person.，Aves time, labor and cost。

And a new two-room blessing.，Have a car-like driving experience immediately。However，This has to be experienced by the hanging friends to feel deeply.。

If you want to go from medium tonnage to large tonnage,，Undertake larger projects，In the midst of this，The 100-ton crane may be the first choice for many people.。On this basis，Want to pick out a device with both strength and quality?， That STC1000C7-8 would be a good choice.。

Previous: In the wave of the times, this group of high machinery people are both ordinary and extraordinary | The Second China High Machinery Industry Video Festival

Next: Jini's Twenty-five Years of China Road-New Product Experience Day Customer Activities Set off a Climax Again!