Product | Danfoss New Generation Aerial Vehicle Travel Drive Motor-A-Delta Series Motor

April 19, 2023

A-DeltaSeries Motor

A-DeltaSeries motors feature a two-section design，On the premise of ensuring the compactness of the product，Through the high strength design of parts and the use of special high-pressure seals, the product can obtain the best reliability in the application of aerial work platform.。According to the working characteristics of aerial work platform，Design improvement of special performance parameters，Includes a transmission member、Technical parameters of cycloid pair、Sealing technology, etc，Motor stability at low speed、The high efficiency under high pressure working conditions and the impact resistance of transmission parts have excellent performance.。

Drive shaft design、Bearing designHigher specification design standards compared to similar products on the market，Completely avoid the failure of the transmission part，Ffectively guarantee that service life of the product。

Compensation disc designWith the increase of pressure, the pressing force of the plane is gradually increased.，Effectively reduce internal leakage of high pressure，Ensure product efficiency under high pressure conditions。

Special clearance design，Reduce leakage between parts and surfaces，Ensure the low-speed stability of the product。

Motor linkage shaftAtParameter design、Material selectionAndHeat treatment processThe requirement of enhancing the wear resistance is taken into account.，Ffectively reduce that generation of abraded object，It plays an important role in improving the service life of the motor and the whole hydraulic system.。

The motor is usedSpecial high pressure shaft seal，More than ten years of market application verification，At the same time, it has passed the company's enhanced engineering test verification.，The high pressure resistance of the motor is ensured.。

The bearing at the front end of the motor is designed at the outer end of the shaft seal，In this way, the side load force of the bearing can be effectively reduced under the same load.，Meanwhile, the runout of the output shaft at the shaft seal and the flexible deformation of the output shaft are reduced，The bearing can be ensured to be in a better application state.，Thereby improving the service life of the bearing.。

Two-section design，Improve the cost performance of products