Not only in colour harmony with SENNEBOGEN Recycling expert OZO uses mobile electrical solution in hall operation

The regional recycling company OZO in Ostrava, Czech Republic, recently commissioned a new line for processing pre-pressed plastic bales. The heart of the line is an 818 Mobile with an electric motor, which was delivered in September 2018.

Without exception, Vehicles painted green on the 9-hectare premises of OZO Ostrava s.r.o. - you might think you are in the middle oft he production areas of SENNEBOGEN itself. However, there is only one SENNEBOGEN machine hidden in the halls of the recycling - a special machine that fits seamlessly into the newly created processes on site.

The mobile electric Material Handler fills a RDF plant with pre-sorted thermoplastic waste from regional sorting lines in a 30-second work cycle. It is particularly important here that the driver can control different viewing heights at the workplace: whether aligned with the hopper to be filled or with small parts on the floor, the flexible cab elevation was an essential component in the choice of machine.

"In the long term, we also wanted to sustainably increase our production capacity. That is why we decided to build a completely new line. For us, however, sustainability is not just a key word when it comes to economic success. As a regional recycler, we also bear responsibility for the population and must set a good example," says Vladimíra Karasová, PR Manager at OZO, about the company's decision to use an electric Material Handler that guarantees low-emission operation.

"We were also very satisfied with the counseling from our SENNEBOGEN contact person and look forward to further cooperation," says Karasová about the project implementation by the Czech dealer Merimex, who initiated and implemented the project in Ostrava.

Captions:

• The mobile 818 electric Excavator feeding the RDF plant.

• Rear view of the 818 M Special - strain-relieved cable with power supply from the side walls of the hall

• Official machine handover (from left to right): Jiří Kučera (Merimex), Robert Peřina (Investment Manager, OZO Ostrava s.r.o.), Uwe Hammer (SENNEBOGEN)

Previous: Efficient division of work in timber handling with two SENNEBOGEN 730 M-HD at Rettenmeier Holzindustrie

Next: Large steel hall has to be removed - a job for the SENNEBOGEN Longfront Demolition Material Handler 870 E