Products Center
More Products

Lingyu automobile: [2020 star products] the powder can car wrapped in aluminum alloy is here...

September 10, 2020



in an industry where lightweight is becoming more attractive Lighter and stronger materials are key to the breakthrough.
after careful selection by lingyu r&d team Aluminum magnesium alloy is used as material
This semi-trailer for transporting aluminum alloy grain material
was developed. Subvert the traditional carbon steel material and become the new favorite of the industry
Let's take a look at it today. The extraordinary ”

tips

what are the characteristics of aluminum alloy

1. Light and soft. The density of aluminum is 2171g/ cm3, which is about one third of that of steel. Young's modulus is also about a third of that of steel.

2. High strength ratio. Pure aluminum has one-fifth the tensile strength of mild steel. But after heat treatment and alloying strengthening, its strength will increase greatly.

3. Good corrosion resistance. One of the characteristics of aluminum alloy is the contact with air surface will form a layer of dense oxide film, this film can prevent corrosion, so corrosion resistance is good. If it is implemented again “ Alumina film treatment, can prevent corrosion.

4, good processing performance. Profile extrusion performance of railway Vehicles is good, secondary machining, bending processing is easier.

5. Easy to regenerate. The melting point of aluminum is low (660 ℃), and the regeneration is simple. Waste disposal is also pollution-free, conducive to environmental protection, in line with the sustainable development strategy

Tanks

Continuous use of magnesium aluminum series of high quality aluminum, excellent processing performance, high strength and safe use; The new optimization design is made for the tank structure, the tank length is short and the fluidization Angle is large, reducing the fluidization dead Angle, the higher fluidization efficiency of the fluidized bed gives the product more efficient performance, lower residual and faster unloading.

Line

Aluminum alloy pipeline system, more coordinated pipeline, more smooth air intake; Equipped with the down type 5 "discharge pipeline, the discharge resistance is smaller, while strengthening the wear resistance of the pipeline, the discharge rate since high, the remaining ash rate is lower, modular pipeline, maintenance, maintenance convenience.



Frame

The use of high strength l-shaped aluminum profile, new design concept, good frame structure, improve the frame tensile, torsion resistance.


01

35 square aluminum alloy powder can semitrailer, the wheelbase of the whole Vehicle is shorter, which meets the requirements of 12 meters loadometer on the whole Vehicle composed of natural gas Tractor, the length is shorter, the vehicle is more flexible.

02

Aluminum anti-skid walkway, aluminum wheel cover, aluminum climbing ladder, high humanization, light weight, more convenient to use, safe.

03

Aluminum alloy can cover, 8T lightweight legs, 10T lightweight axle, three plate springs, light suspension, aluminum alloy forged rims, 12r22.5 tires and other high-end lightweight configuration, the vehicle weight as low as 4.9 tons.

04

Optional air suspension, vehicle running more stable.

Lighter weight, stronger mass
The whole vehicle is basically wrapped in aluminum alloy
Call it what it is. Armed to the teeth. The

If there is anything else you want to know Leave a comment in the comments section and discuss

Next issue star product: jiefang lightweight mixing Truck

Construction Machinery Online

Language Options

E-Mail: alina@global-ce.com TEL: 0086-10-84673349 FAX: 0086-10-84673349
Site: International - China - U.S.A - Russia - France - Spain - Portugal - India - Germany - Saudi Arabia - Indonesia

Copyright Notice 2002-2024 global-ce.com Construction Machinery Online. All rights reserved.

Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China